Low temperature constant temperature equipment

1. It can replace dry ice and the liquid nitrogen to make low temperature and provide low temperature condition for the related equipments.

2. At the bottom, installation of magnetic stirring, mixing in two segments, so that the temperature of the stainless steel tank can be more even and improve the accuracy of temperature control.

Low temperature constant temperature reaction bath

1. Compressor: Danfoss original

2. Oil separator with the Danfoss original

3. Ternary compound cascade refrigeration.

4. Has high and low pressure control.

5. Refrigerant using R50D, R13, R14.

6. Controller of the company consciously developed the microcomputer controller, delay protection function.

7. Use the balance of heat and cold legal system, so that the temperature accuracy of±0.2°C.

8. Shell with high-quality cold rolled plate, electrostatic spray.

 

When the actual temperature control of the controller is poor, you can press and hold the decrease button for 8 seconds to enter the auto-tuning state and the AT light flashes. Press the button for 8 seconds to exit the auto-tuning state. When the auto-tuning is finished, the AT light is always on, and a set of control parameters is obtained and automatically saved. In the self-tuning state, if the compressor is not normally open, the cooling output must be turned off to obtain accurate control parameters.