Round Bottom Flask Heating Mantle

The Round bottom flask heating mantle is driven by a micro-motor to rotate a high-temperature-resistant powerful magnet to generate a rotating magnetic field to drive the stirring bar in the container to rotate, thereby stirring, mixing or auxiliary heating the liquid in the container so that the solution can be fully mixed at the set temperature. Can be widely used in biology, medicine, chemistry and other fields.

ZKCL series is a round bottom flask heating mantle with magnetic stirring function. In order to ensure the performance of the product and enable you to use the product safely and effectively, please read this instruction manual carefully before use.

 

Product Features

1. It adopts heating cover heating, square heating zone, uniform heating and so on. Up to 380 degrees Celsius

 

2. Fuzzy PID temperature control, dual digital display, self-tuning function, high temperature measurement, small temperature fluctuation, one-touch operation, internal and external thermocouple, SCR output, 160-240V wide voltage power supply, self-protection function.

 

3. Can be heated and stirred in standard or non-standard, non-magnetic metal or non-metal 50-20000 ml containers.

 

4.Disposable molded aluminum casing, beautiful; anti-corrosion, good insulation performance.

 

5. Built-in over temperature protection.

 

6.30° work plate fits your seat and perspective.

 

7. Low speed and stable, high speed and strong.

 

Usage

1. Insert the sensor plug or external sensor probe, insert the ~220V / 110V power supply, and turn the power switch.

 

2. Self-tuning function: The starting function can make different heating sections, heating power or solution capacity irregular, heating time is the shortest, temperature fluctuation is the smallest, and the balance is optimal, but the heating medium or heating condition should be adjusted automatically.

 

3. There is a rubber plug at the back of the heating plate to protect the internal corrosion and rust of the local thermocouple socket. The probe is disconnected and the machine stops working. If using a thermocouple for external use, pull out the plug, insert the plug of the external thermocouple socket and the lock nut, and then lower the stainless steel rod in the solution to control the heating temperature.

 

4, the appliance does not break through the careful protection function, when the electric accidental contact is bad, the window "OFF" blue appliance or stop heating, and then use the inspection.