Short-path distillation setup use procedure
5L short path distillation setup
5L short path distillation setup part
| Model | Parts name | Parts number |
| 5L short path distillation | 5000 ml Digital Heating Mantle | 1 |
| 5000 ml 2 Neck Boiling Flask | 1 | |
| Short Path Distillation Head | 1 | |
| Cow Receiver | 1 | |
| 500 ml Round Bottom Flasks | 3 | |
| Plastic Keck Clips | 7 | |
| Cast Iron Stand | 1 | |
| Metal Three Finger Clamp | 1 |
What should you pay attention to when using the short-path distillation procedure?
1. Check if the inlet and outlet valves of the cooling water are normally open and the pressure is within the normal range.
2. Check if the inlet and outlet valves of the cooling water of each component are in the open state.
3. The equipment is heated by hot oil. The surface temperature of the external heating body is high. Do not touch it with your hands to avoid burns.
4. Check if the ethanol in the cryostat is sufficient.
5. Pay attention to whether the liquid nitrogen in the liquid nitrogen tank is sufficient.
6. Check if the connection between the cold well and the equipment is closed.
Send Us Message
Your message was sent successfully.
Sorry!Something Went Wrong.